Options not mentioned above should be kept with default values. Note 2: to use our NetShield DNS filtering feature, append the suffix +f1 to your Username to block malware, or +f2 to block malware, ads, and trackers (for example 123456789+f2). These are not the same as your regular Proton Account username and password. Note 1: To find your OpenVPN username and password, go to your Proton Account. Hash Algorithm = SHA-512 User Pass Authentication = Enable Username, Password = Your OpenVPN credentials If the Username and Password fields are missing, fill in the remaining fields and continue with step 5.1 Advanced Options = Enable (this will enable additional options) TLS Cipher = None LZO Compression = No NAT = Enable If you are using 10.7.7.1 or 10.7.0.1 as "Static DNS 1" in Step 1, then select TCP for Tunnel Protocol. Note: If you are using 10.8.8.1 or 10.8.0.1 as "Static DNS 1" in Step 1, then select UDP for Tunnel Protocol. For example, 1194 or 443 Tunnel Device = TUN Tunnel Protocol = copy the value from the proto line, e.g., UDP or TCP Then set the necessary fields as follows: Server IP/Name = copy the value in the line starting with 'remoteʼ, excluding the port number at the end, e.g., 123.123.123.123 or de. Port = copy the value following the server IP address. Under OpenVPN Client, set Start OpenVPN Client = Enable In our example, we chose 1194.ovpn as an example. Open the desired *.ovpn config file with a text editor, such as Notepad. (this is a recommended step to make sure you get no IP leaks)ģ. Navigate to Setup > IPV6 and set IPv6 to Disable, then Save & Apply Settings. NOTE: If you are a FREE user and using FREE servers to configure your router, you will have to use 10.7.0.1 for Static DNS 1 If you are using TCP: Static DNS 1 = 10.7.7.1 NOTE: If you are a FREE user and using FREE servers to configure your router, you will have to use 10.8.0.1 for Static DNS 1 If you are using UDP: Static DNS 1 = 10.8.8.1 Static DNS 2 = 0.0.0.0 Static DNS 3 = 0.0.0.0 (default) Use DNSMasq for DHCP = Checked Use DNSMasq for DNS = Checked DHCP-Authoritative = Checked (The DNS values depend on which transport protocol you want to use, either UDP or TCP. Under Network Address Server Settings (DHCP), set the DNS values to the following Proton VPN DNS addresses: ![]() Log in to your DD-WRT Administrative Interface, usually accomplished using your browser and opening the IP of your router (per default 192.168.1.1 or similar). Learn more: How to download OpenVPN config files for Proton VPN. Regardless of whether you are setting your router up yourself or using a pre-configured router, you will need your OpenVPN config files from the Proton VPN Dashboard. If you buy a Proton VPN pre-configured router, you will only need to enter your Proton VPN OpenVPN credentials. No matter what Proton VPN plan you use, you can configure your router to work with your Proton VPN account. FlashRouters makes it easy for anyone to have VPN security for all of the Internet-connected devices in their home, including smart phones, SmartTVs, and gaming consoles. Below we explain how to get Proton VPN to work on your DD-WRT router.īut, you can skip this setup process by purchasing a pre-configured router from FlashRouters. If you set up your VPN account to work on your router, you can protect the online activity of each device connected to your WiFi. This is a step-by-step guide to setting up Proton VPN on your DD-WRT router.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |